This new layout allows you to use heatsinks or thermal bridges to minimize heating issues and boost thermal performance. Electroless Nickel Immersion Gold (ENIG) finish offers outstanding electrical performance in between all the components of a PCB. The new boards are easily parallelable for lower noise and higher current
Ultralow-noise (~0.58µVRMS) low-dropout linear regulators (LDO)
0 - 15V, 1A, Fixed output voltage (Rset)
Premium quality PCB with 1oz Copper and Electroless Nickel Immersion Gold (ENIG) finish
- Wide Input Voltage Range: -1.8V to -20V
- Output Voltage Range: 0V to -19.5V
- Output Current: 1A
- Low Dropout Voltage: 235mV
- Ultralow RMS Noise: ~0.58µVRMS (10Hz to 100kHz)
- Ultralow Spot Noise: 2nV/√Hz at 10kHz
- Ultrahigh PSRR: 74dB at 1MHz
- Single Resistor Programs Output Voltage
- Built-In Fixed Current Limit and Thermal Shutdown
- Parallelable for Lower Noise and Higher Current
- PCB size: 24mm x 40mm
- Operating Temperature Range:–40°C to 125°C
Package Includes
1x Fully completed and tested LT3094-1A0G PCB
BOM (Bill of Materials)
LT3045EMSE x 2: IC, Low Noise Power Solution, Linear Technology – United States
TPSC226K025R0275 x 2: Cap Tant Solid 26uF 25V C CASE 10%, AVX – Japan
GRM31CR71E106KA12L x 6 : Cap Ceramic 10uF 25V X7R 10% SMD 1206, Murata – Japan
GRM31MR71E475KA88L x 1 : Cap Ceramic 4.7uF 25V X7R 10% SMD 1206, Murata – Japan
CRCW0603xxxxFKEA x1: Res Thick Film 0603 1% 0.1W(1/10W) ±100p, Vishay – USA
|